PartsTable
Technical Data Sheet
Download PDF

7170189-1 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7170189-1: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, special_features: COLOR IS FORREST GREEN; ITEM IS 0.125 INCH THICK AND EACH LEG IS 0.750 INCH LONG AND 0.750 INCH WIDE IN, surface_treatment: PRIMER AND PAINT, mounting_hole_type: COUNTERSUNK, end_item_identification: 6605-01-515-4610, part_name_assigned_by_controlling_agency: UH-60 VERTICAL STOP BRACKET. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-523-7622, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7170189-1
NSN: 5340-01-523-7622
FSC: 5340 — Hardware, Commercial
CAGE: 1NZ85 — EMCORE SPACE & NAVIGATION CORPORATION DIV SPACE & NAVIGATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
special_featuresCOLOR IS FORREST GREEN; ITEM IS 0.125 INCH THICK AND EACH LEG IS 0.750 INCH LONG AND 0.750 INCH WIDE IN
surface_treatmentPRIMER AND PAINT
mounting_hole_typeCOUNTERSUNK
end_item_identification6605-01-515-4610
part_name_assigned_by_controlling_agencyUH-60 VERTICAL STOP BRACKET
NSN5340-01-523-7622
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7170189-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PRIMER AND PAINT
•
MATERIAL: ALUMINUM ALLOY
•
MOUNTING HOLE TYPE: COUNTERSUNK
TECHNICAL CHARACTERISTICS
SPECIAL FEATURESCOLOR IS FORREST GREEN; ITEM IS 0.125 INCH THICK AND EACH LEG IS 0.750 INCH LONG AND 0.750 INCH WIDE IN
SURFACE TREATMENTPRIMER AND PAINT
PART NAME ASSIGNED BY CONTROLLING AGENCYUH-60 VERTICAL STOP BRACKET
END ITEM IDENTIFICATION6605-01-515-4610
MATERIALALUMINUM ALLOY
MOUNTING HOLE TYPECOUNTERSUNK
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7170189-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7170189-1?
7170189-1 is a BRACKET,ANGLE.
What is the NSN for 7170189-1?
7170189-1 is cataloged in the U.S. Government catalog under NSN 5340-01-523-7622. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7170189-1