PartsTable
Technical Data Sheet
Download PDF

717-702065-2 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

717-702065-2: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, diameter: 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN, material: STEEL COMP 302 OVERALL, head_style: FLUSH, chamfer_length: 0.015 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-249-1047, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
717-702065-2
NSN: 5315-01-249-1047
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
height0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
diameter0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
materialSTEEL COMP 302 OVERALL
head_styleFLUSH
chamfer_length0.015 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
under_head_length0.650 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN
first_hole_diameter0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
hole_arrangement_styleDRILLED THRU CENTER
NSN5315-01-249-1047
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 717-702065-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.015 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: DRILLED THRU CENTER
•
UNDER HEAD LENGTH: 0.650 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.015 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEDRILLED THRU CENTER
UNDER HEAD LENGTH0.650 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720,COND B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
10123235Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 717-702065-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 717-702065-2?
717-702065-2 is a PIN,STRAIGHT,HEADED.
What parts can replace 717-702065-2?
There is 1 known substitute for 717-702065-2: 10123235. Substitute compatibility should be verified for your specific system.
What is the NSN for 717-702065-2?
717-702065-2 is cataloged in the U.S. Government catalog under NSN 5315-01-249-1047. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 717-702065-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.