PartsTable
Technical Data Sheet
PartsTable / MRO / 717-7
717-7 ✓ Verified by PartsTable
PanzerGlass · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Protect your phone from the hazards of everyday life with PanzerGlass®. Accidental bumps against sharp-edged dangers in your pocket or crushing falls onto stone-hard pavements are no match for this scratch and shock-resistant screen protector. The screen protector is easy to apply and once installed, you’ll never again fear the sight of your phone tumbling to the ground.

This may never happen, but if it does, you’ll regret not having clicked “add to cart”.<br><br>The Edge-to-Edge screen protector covers the entire front surface of your phone, while leaving room for a case. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-159-2598, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 717-7
NSN: 5310-00-159-2598
FSC: 5310
CAGE: 80850 — INTERLINE BRANDS, INC. DBA J. A. SEXAUER (USA)
SPECIFICATIONS
height2.470 INCHES MINIMUM AND 2.530 INCHES MAXIMUM IN
materialALUMINUM ALLOY OVERALL
body_styleSIDE BARRIER TYPE
body_width1.000 INCHES NOMINAL IN
body_height0.875 INCHES NOMINAL IN
body_length1.812 INCHES NOMINAL IN
design_typePREFORMED, SINGLE BEND, NONCONVERTIBLE VALVE
recess_depth0.101 INCHES NOMINAL IN
thread_class2B
usage_designINNER TUBE
hole_diameter0.188 INCHES NOMINAL IN
overall_width4.000 INCHES NOMINAL IN
NSN5310-00-159-2598
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 717-7 · PanzerGlass ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECESSED
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
OUTSIDE DIAMETER: 0.637 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.022 INCHES NOMINAL IN
•
RECESS DEPTH: 0.101 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORRECESSED
MATERIALSTEEL CORROSION RESISTING OVERALL
OUTSIDE DIAMETER0.637 INCHES NOMINAL IN
MATERIAL THICKNESS0.022 INCHES NOMINAL IN
RECESS DEPTH0.101 INCHES NOMINAL IN
OVERALL HEIGHT0.123 INCHES NOMINAL IN
HOLE DIAMETER0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
7177Interchangeable
interchangeable cross-reference
interchangeable
8431-3Interchangeable
interchangeable cross-reference
interchangeable
717-1Interchangeable
interchangeable cross-reference
interchangeable
717-02Interchangeable
interchangeable cross-reference
interchangeable
VS-740-1-GOVTInterchangeable
interchangeable cross-reference
interchangeable
J-17120-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 717-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 717-7?
717-7 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by PanzerGlass. It is classified as a MRO (MRO_GENERAL).
What parts can replace 717-7?
There are 14 known substitutes for 717-7: 7177, 8431-3, 717-1 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 717-7?
717-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-159-2598. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 717-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026