716772 — BEARING,WASHER,THRUST

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

716772: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include overall_width: 5.500 INCHES NOMINAL IN, overall_height: 1.500 INCHES NOMINAL IN, overall_length: 6.500 INCHES NOMINAL IN, special_features: TERMINAL BOARD 1; DIODE 2; TERMINAL 10; CAPACITOR 1; RELAY 2; RESISTOR 5, end_item_identification: 5840-01-137-5984,RADAR SIGNAL SIMULATOR,AN/MSQ-T43(V)3, part_name_assigned_by_controlling_agency: USAGE DESIGN:DISCHARGE CROWBAR ASSY. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-949-4975, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 716772

NSN: 3120-00-949-4975
NIINs: 009494975, 011991035
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 65282 — WHITE MOTOR CORP (USA)

SPECIFICATIONS

overall_width	5.500 INCHES NOMINAL IN
overall_height	1.500 INCHES NOMINAL IN
overall_length	6.500 INCHES NOMINAL IN
special_features	TERMINAL BOARD 1; DIODE 2; TERMINAL 10; CAPACITOR 1; RELAY 2; RESISTOR 5
end_item_identification	5840-01-137-5984,RADAR SIGNAL SIMULATOR,AN/MSQ-T43(V)3
part_name_assigned_by_controlling_agency	USAGE DESIGN:DISCHARGE CROWBAR ASSY
NSN	3120-00-949-4975

COMPONENT DIAGRAM

KEY FEATURES

•

CORNER SHAPE: SQUARE FIRST INSIDE CORNER

•

OVERALL THICKNESS: 0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: ROUND

•

DIAMETER: 1.0100 INCHES MINIMUM AND 1.0200 INCHES MAXIMUM IN

•

CROSS-SECTIONAL SHAPE STYLE: CONVEX

•

OUTSIDE DIAMETER: 2.4380 INCHES NOMINAL IN

•

CURVATURE INSIDE RADIUS: 3.0270 INCHES MINIMUM AND 3.0290 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

CORNER SHAPE	SQUARE FIRST INSIDE CORNER
CORNER SHAPE	SQUARE SECOND INSIDE CORNER
OVERALL THICKNESS	0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM IN
STYLE DESIGNATOR	ROUND
DIAMETER	1.0100 INCHES MINIMUM AND 1.0200 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE	CONVEX
OUTSIDE DIAMETER	2.4380 INCHES NOMINAL IN
CURVATURE INSIDE RADIUS	3.0270 INCHES MINIMUM AND 3.0290 INCHES MAXIMUM IN
CURVATURE OUTSIDE RADIUS	3.0560 INCHES MINIMUM AND 3.0610 INCHES MAXIMUM IN
MATERIAL	COPPER ALLOY OVERALL

SUBSTITUTES & CROSS-REFERENCES 7

27810Reference document

Cablestogo 1ft Cat6 Snagless Utp Cable-Organge

Reference document — Secondary reference

57306 R1Reference document

Same NSN cross-reference

Reference document — Secondary reference

FP34478Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2256939Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

027810Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

144EX98Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 716772?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 716772?

716772 is a BEARING,WASHER,THRUST. It is classified as a MRO (MRO_GENERAL).

What parts can replace 716772?

There are 7 known substitutes for 716772: 27810, 57306 R1, FP34478 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 716772?

716772 is cataloged in the U.S. Government catalog under NSN 3120-00-949-4975. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

716772 — BEARING,WASHER,THRUST

Request a Quote — 716772