PartsTable
Technical Data Sheet
Download PDF

71646 — VALVE,LINEAR,DIRECTIONAL CONTROL

✓ Government record, cited
Hama · NUT WASHER
PRODUCT OVERVIEW

71646: VALVE,LINEAR,DIRECTIONAL CONTROL.

- Standard filter for colour photos in the open air - Removes haze e.g. in case of shots at the sea or in high mountain regions - Avoids blue cast - Blocks ultraviolet rays up to 365 nm - Mired value +10 - At the same time protection of the lens against scratches, dust and finger-marks - Normal coating: one layer on each side - Quality standard (glass): ProClass ***** - Impact of picture: - Pleasant, high-contrast colours with warmer character, specially for landscape and town shots - Horizon and subjects which are farer away are sharp and clear This part is cataloged in the U.S. Government catalog under NSN 5310-00-208-5333, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
71646
NSN: 5310-00-208-5333
NIINs: 002085333, 002906766, 013308255, 015140821
FSC: 5310 — Nuts and Washers
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
special_featuresMANUFACTURERS NAME VALVE, LANDING GEAR
end_item_identificationF-22 AIRCRAFT
NSN5310-00-208-5333
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 71646 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.312 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
NUT HEIGHT: 0.109 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.312 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
NONDEFINITIVE SPEC/STD DATAA TYPE
NUT HEIGHT0.109 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEHEXAGON
THREAD CLASS1B
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES 4
NHT601-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
981P5Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILS933TYPEAReference document
Same NSN cross-reference
Reference document — Identification reference
600981Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 71646?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71646?
71646 is a VALVE,LINEAR,DIRECTIONAL CONTROL manufactured by Hama.
What parts can replace 71646?
There are 4 known substitutes for 71646: NHT601-3, 981P5, MILS933TYPEA and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 71646?
71646 is cataloged in the U.S. Government catalog under NSN 5310-00-208-5333. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71646