PartsTable
Technical Data Sheet
PartsTable / MRO / 7151-6
7151-6 ✓ Verified by PartsTable
HP · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: CORK OVERALL, body_style: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES, body_width: 0.219 INCHES NOMINAL IN, body_height: 0.469 INCHES NOMINAL IN, body_length: 0.797 INCHES NOMINAL IN, aperture_width: 2.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-091-9063, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7151-6
NSN: 5330-00-091-9063
FSC: 5330
CAGE: 22593 — FITZGERALD GASKET A CO OF TANNETICS INC (USA)
SPECIFICATIONS
materialCORK OVERALL
body_styleW/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
body_width0.219 INCHES NOMINAL IN
body_height0.469 INCHES NOMINAL IN
body_length0.797 INCHES NOMINAL IN
aperture_width2.500 INCHES NOMINAL IN
aperture_length9.812 INCHES NOMINAL IN
terminal_length1.120 INCHES NOMINAL IN
special_featuresADAPTER,ELECTRICAL TEST
style_designatorOVAL
bearing_surface_width0.375 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
NSN5330-00-091-9063
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7151-6 MFR: HP ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SURFACE WIDTH: 0.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
APERTURE LENGTH: 9.812 INCHES NOMINAL IN
•
APERTURE WIDTH: 2.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OVAL
•
MATERIAL: CORK OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
BEARING SURFACE WIDTH0.375 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
APERTURE LENGTH9.812 INCHES NOMINAL IN
APERTURE WIDTH2.500 INCHES NOMINAL IN
STYLE DESIGNATOROVAL
MATERIALCORK OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
SCD1993-100Interchangeable
interchangeable cross-reference
interchangeable
71-516Interchangeable
interchangeable cross-reference
interchangeable
CA266Interchangeable
interchangeable cross-reference
interchangeable
2409-1493525REVAPCPCP3049-8Interchangeable
interchangeable cross-reference
interchangeable
50269Interchangeable
interchangeable cross-reference
interchangeable
264218-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7151-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7151-6?
7151-6 is a CAPACITOR,FIXED,MICA DIELECTRIC manufactured by HP. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7151-6?
There are 16 known substitutes for 7151-6: SCD1993-100, 71-516, CA266 and 13 more. Substitute compatibility should be verified for your specific system.
Is 7151-6 still available?
7151-6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7151-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026