715085 — HUB,CLUTCH DRIVE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

715085: HUB,CLUTCH DRIVE.

The HUB,CLUTCH DRIVE is a the manufacturer industrial component. Key specifications include material: ALUMINUM, tripod_head_style: THREADED RING, azimuth_adjustment_mechanism: NOT PROVIDED, elevation_adjustment_mechanism: NOT PROVIDED, instrument_light_accommodation: NOT PROVIDED. This part is cataloged in the U.S.

Government catalog under NSN 2520-00-562-0071, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

715085

NSN: 2520-00-562-0071
NIINs: 005620071, 010377637
FSC: 2520 — Vehicular Power Transmission Components
CAGE: 61208 — TWIN DISC, INCORPORATED DBA TWIN DISC MID-ATLANTIC (USA)

SPECIFICATIONS

material	ALUMINUM
tripod_head_style	THREADED RING
azimuth_adjustment_mechanism	NOT PROVIDED
elevation_adjustment_mechanism	NOT PROVIDED
instrument_light_accommodation	NOT PROVIDED
NSN	2520-00-562-0071

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: MATERIAL ALLOY STEEL;HEAT TREAT ROCKWELL C MIN 32 TO MAX 36;INTERNAL SPLINE DATA 16/32 PITCH 33 TEETH PITCH DIA 2.0625 IN. ROOT DIA 2.154 IN. 30 DEGREE PRESSURE ANGLE TID 2.125 IN.;EXTERNAL SPLINE S PITCH SPECIAL 75 TEETH 10 DEGREE PRESSURE ANGLE PITCH DIA 15.000IN. TID 14.800 IN. ROOT DIA 14.700 IN.;OD MIN 3.670 IN. MAX 3.730 IN. ID MIN 2.011 IN. MAX 2.016 IN.;MOUNTING HOLES DRILL MIN DIA 0.980 IN. MAX DIA 1.020 IN. 16 HOLES EQUALLY SPACED;ABOVEAND BELOW HUB DRILL 4 HOLES DIA OF 1.3125 IN.;ON HUB 12 HOLES EQUALLY SPACEDDIA OF 0.2812 IN. IN

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION

MATERIAL ALLOY STEEL;HEAT TREAT ROCKWELL C MIN 32 TO MAX 36;INTERNAL SPLINE DATA 16/32 PITCH 33 TEETH PITCH DIA 2.0625 IN. ROOT DIA 2.154 IN. 30 DEGREE PRESSURE ANGLE TID 2.125 IN.;EXTERNAL SPLINE S PITCH SPECIAL 75 TEETH 10 DEGREE PRESSURE ANGLE PITCH DIA 15.000IN. TID 14.800 IN. ROOT DIA 14.700 IN.;OD MIN 3.670 IN. MAX 3.730 IN. ID MIN 2.011 IN. MAX 2.016 IN.;MOUNTING HOLES DRILL MIN DIA 0.980 IN. MAX DIA 1.020 IN. 16 HOLES EQUALLY SPACED;ABOVEAND BELOW HUB DRILL 4 HOLES DIA OF 1.3125 IN.;ON HUB 12 HOLES EQUALLY SPACEDDIA OF 0.2812 IN. IN

SUBSTITUTES & CROSS-REFERENCES 2

7708743Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

6766373Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 715085?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 715085?

715085 is a HUB,CLUTCH DRIVE.

What parts can replace 715085?

There are 2 known substitutes for 715085: 7708743, 6766373. Substitute compatibility should be verified for your specific system.

What is the NSN for 715085?

715085 is cataloged in the U.S. Government catalog under NSN 2520-00-562-0071. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

715085 — HUB,CLUTCH DRIVE

Request a Quote — 715085