PartsTable
Technical Data Sheet
Download PDF

715016 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

715016: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, inside_diameter: 1.180 INCHES NOMINAL IN, style_designator: CYLINDRICAL, spring_free_length: 4.250 INCHES NOMINAL IN, spring_solid_length: 1.312 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-922-6083, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
715016
NSN: 5330-00-922-6083
NIINs: 009226083, 010620993
FSC: 5330 — Packing and Gasket Materials
CAGE: 00912 — AKRON BRASS COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
inside_diameter1.180 INCHES NOMINAL IN
style_designatorCYLINDRICAL
spring_free_length4.250 INCHES NOMINAL IN
spring_solid_length1.312 INCHES MAXIMUM IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_deflection_rate15.000 POUNDS PER INCH NOMINAL LBS
spring_free_outside_diameter1.420 INCHES NOMINAL IN
NSN5330-00-922-6083
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 715016 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUBSTITUTES & CROSS-REFERENCES 4
7-15-009Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
500Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
D8114 ITEM 22Reference document
Same NSN cross-reference
Reference document — Secondary reference
1100Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 715016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 715016?
715016 is a GASKET.
What parts can replace 715016?
There are 4 known substitutes for 715016: 7-15-009, 500, D8114 ITEM 22 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 715016?
715016 is cataloged in the U.S. Government catalog under NSN 5330-00-922-6083. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 715016

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.