PartsTable
Technical Data Sheet
7149 ✓ Verified by PartsTable
Bissell · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Get a powerful clean that adds a refreshing scent to your carpets, upholstery, and home with BISSELL SpotClean Spot & Stain With Febreze® Spring & Renewal™ portable spot carpet cleaner formula. The 2X® concentrated formula powers through tough spots and stains while adding Febreze™ freshness. This earth-friendly portable carpet cleaner formula contains no heavy metals, phosphates, or dyes; bottle contains a minimum of 25% postconsumer recycled plastic.

Safe for use in all portable carpet deep cleaners, you’ll enjoy the incredible scent of a great clean.<br><br>- This spot cleaning formula removes deep-down dirt and odors from carpet and upholstery while adding a bright, refreshing spring scent<br>- Dual-action formula gives an incredible clean while adding the scent of Febreze® Spring & Renewal™<br>- 2X concentrated formula<br>- Earth-friendly formula contains no heavy metals, phosphates, or dyes; bottle contains a minimum of 25% postconsumer recycled plastic<br>- Safe for use in porta This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-406-2506, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 7149
NSN: 5330-00-406-2506
FSC: 5330
CAGE: 80850 — INTERLINE BRANDS, INC. DBA J. A. SEXAUER (USA)
SPECIFICATIONS
colorBLACK SINGLE ACTUATOR
materialSTEEL OVERALL
body_stylePANEL MOUNT
body_width1.250 INCHES NOMINAL IN
shell_typeSOLID
body_height1.720 INCHES MINIMUM AND 1.880 INCHES MAXIMUM IN
body_length2.125 INCHES NOMINAL IN
design_typeLIMITED
reset_methodMANUAL
overall_width0.960 INCHES NOMINAL IN
pole_quantity1
terminal_typeTAB, SOLDER LUG SINGLE MATING END SINGLE CONTACT GROUPING
NSN5330-00-406-2506
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7149 MFR: Bissell ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
PERIPHERAL DIAMETER: 0.469 INCHES NOMINAL IN
CENTER HOLE DIAMETER: 0.172 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
MATERIAL: GLASS OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.469 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.172 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
MATERIALGLASS OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
7149Interchangeable
interchangeable cross-reference
interchangeable
FDN7149Interchangeable
interchangeable cross-reference
interchangeable
28-216Interchangeable
interchangeable cross-reference
interchangeable
P-2408-SBInterchangeable
interchangeable cross-reference
interchangeable
53635Interchangeable
interchangeable cross-reference
interchangeable
10040Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7149?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7149?
7149 is a RESISTOR NETWORK,FIXED,FILM manufactured by Bissell. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7149?
There are 15 known substitutes for 7149: 7149, FDN7149, 28-216 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7149?
7149 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-406-2506. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7149