PartsTable
Technical Data Sheet
Download PDF

71461 — CONNECTOR,PLUG,ELECTRICAL

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

71461: CONNECTOR,PLUG,ELECTRICAL.

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include end_item_identification: AIRFIELD DAMAGE REPAIR KIT 3895-01-539-0585/WATER DELIVERY SYSTEM, part_name_assigned_by_controlling_agency: HASE HANGER. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-377-3052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 71461
NSN: 5330-00-377-3052
NIINs: 003773052, 009906870, 013660193, 014216066, 015477688
FSC: 5330 — Packing and Gasket Materials
CAGE: 22593 — FITZGERALD GASKET A CO OF TANNETICS INC (USA)
SPECIFICATIONS
end_item_identificationAIRFIELD DAMAGE REPAIR KIT 3895-01-539-0585/WATER DELIVERY SYSTEM
part_name_assigned_by_controlling_agencyHASE HANGER
NSN5330-00-377-3052
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 71461 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.438 INCHES NOMINAL IN
•
BEARING SURFACE WIDTH: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: CORK OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.438 INCHES NOMINAL IN
BEARING SURFACE WIDTH0.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALCORK OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
5755Reference document
Same NSN cross-reference
Reference document — Secondary reference
35626Reference document
Same NSN cross-reference
Reference document — Secondary reference
Y400B237Reference document
Same NSN cross-reference
Reference document — Secondary reference
09-5755Reference document
Same NSN cross-reference
Reference document — Secondary reference
864131Reference document
Same NSN cross-reference
Reference document — Secondary reference
850561Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 71461?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71461?
71461 is a CONNECTOR,PLUG,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 71461?
There are 9 known substitutes for 71461: 5755, 35626, Y400B237 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 71461?
71461 is cataloged in the U.S. Government catalog under NSN 5330-00-377-3052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71461