PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 714042
714042 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,GLASS DIELECTRIC. Key specifications include material: STEEL COMP E52100 OVERALL, bore_diameter: 0.6871 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM IN, overall_width: 0.4699 INCHES MINIMUM AND 0.4749 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: OUTER RING, ROLLER, CYLINDRICAL, overall_outside_diameter: 0.8070 INCHES MINIMUM AND 0.8370 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3411, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
714042
NSN: 3110-00-554-3411
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OVERALL
bore_diameter0.6871 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM IN
overall_width0.4699 INCHES MINIMUM AND 0.4749 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorOUTER RING, ROLLER, CYLINDRICAL
overall_outside_diameter0.8070 INCHES MINIMUM AND 0.8370 INCHES MAXIMUM IN
material_document_and_classificationAMS 6444 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN3110-00-554-3411
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 714042 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 110.00 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
LOAD DIRECTION: ANGULAR
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE DIAMETER: 60.00 MILLIMETERS NOMINAL MM
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER110.00 MILLIMETERS NOMINAL MM
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
LOAD DIRECTIONANGULAR
RETAINER FABRICATION METHODPRESSED
BORE DIAMETER60.00 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
OVERALL WIDTH1.4375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
4610PL0776828Interchangeable
interchangeable cross-reference
interchangeable
PCL-1011Interchangeable
interchangeable cross-reference
interchangeable
VP-17-4010Interchangeable
interchangeable cross-reference
interchangeable
3274375Interchangeable
interchangeable cross-reference
interchangeable
11989AInterchangeable
interchangeable cross-reference
interchangeable
72-6970-510Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 714042?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 714042?
714042 is a CAPACITOR,FIXED,GLASS DIELECTRIC.
What parts can replace 714042?
There are 24 known substitutes for 714042: 4610PL0776828, PCL-1011, VP-17-4010 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 714042?
714042 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3411. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 714042

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026