PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 714040
714040 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 50.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MINIMUM, overall_width: 1.1875 INCHES NOMINAL IN, load_direction: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-5834, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
714040
NSN: 3110-00-554-5834
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter50.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MINIMUM
overall_width1.1875 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
special_featuresTYPE 145, GRADE 00
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter90.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-554-5834
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 714040 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 90.00 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE DIAMETER: 50.00 MILLIMETERS NOMINAL MM
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: INWARD CONVERGENT
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER90.00 MILLIMETERS NOMINAL MM
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
BORE DIAMETER50.00 MILLIMETERS NOMINAL MM
SPECIAL FEATURESTYPE 145, GRADE 00
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
907593Interchangeable
interchangeable cross-reference
interchangeable
5507WInterchangeable
interchangeable cross-reference
interchangeable
FS5507Interchangeable
interchangeable cross-reference
interchangeable
629A212DRP1Interchangeable
interchangeable cross-reference
interchangeable
60-0040Interchangeable
interchangeable cross-reference
interchangeable
2895025-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 714040?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 714040?
714040 is a BEARING,BALL,ANNULAR.
What parts can replace 714040?
There are 16 known substitutes for 714040: 907593, 5507W, FS5507 and 13 more. Substitute compatibility should be verified for your specific system.
Is 714040 still available?
714040 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 714040

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026