PartsTable
Technical Data Sheet
Download PDF

714022 — CABLE ASSEMBLY,SPECIAL PURPOSE,E

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

714022: CABLE ASSEMBLY,SPECIAL PURPOSE,E.

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: COPPER FIRST MORTISE, bore_shape: STRAIGHT, bore_diameter: 0.1875 INCHES NOMINAL IN, overall_width: 0.1094 INCHES NOMINAL IN, load_direction: RADIAL, overall_length: 6.000 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-198-2885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
714022
NSN: 3110-00-198-2885
NIINs: 001982885, 002024663, 013064313
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialCOPPER FIRST MORTISE
bore_shapeSTRAIGHT
bore_diameter0.1875 INCHES NOMINAL IN
overall_width0.1094 INCHES NOMINAL IN
load_directionRADIAL
overall_length6.000 INCHES IN
surface_finishGROUND
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter3.750 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter3.062 INCHES NOMINAL IN
overall_outside_diameter0.3125 INCHES NOMINAL IN
NSN3110-00-198-2885
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 714022 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.1094 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.3125 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.5
BORE DIAMETER0.1875 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
P9618522-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
P250A15004Reference document
Same NSN cross-reference
Reference document — Secondary reference
156K25Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
P9618522-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 714022?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 714022?
714022 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 714022?
There are 4 known substitutes for 714022: P9618522-1, P250A15004, 156K25 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 714022?
714022 is cataloged in the U.S. Government catalog under NSN 3110-00-198-2885. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 714022