PartsTable
Technical Data Sheet
Download PDF

7138129-1 — HANDLE,MANUAL CONTROL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7138129-1: HANDLE,MANUAL CONTROL.

The HANDLE,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include thread_class: 2B2B, handle_height: 2.785 INCHES NOMINAL2.785 INCHES NOMINAL IN, overall_length: 13.230 INCHES NOMINAL13.230 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S)THREADED HOLE(S), features_provided: HANDLE LOCKHANDLE LOCK, surface_treatment: PASSIVATE LOCKING MECHANISM. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-338-4538, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7138129-1
NSN: 5340-01-338-4538
FSC: 5340 — Hardware, Commercial
CAGE: 06481 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
thread_class2B2B
handle_height2.785 INCHES NOMINAL2.785 INCHES NOMINAL IN
overall_length13.230 INCHES NOMINAL13.230 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)THREADED HOLE(S)
features_providedHANDLE LOCKHANDLE LOCK
surface_treatmentPASSIVATE LOCKING MECHANISM
nominal_thread_size0.164 INCHES0.164 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity44
surface_treatment_document_and_classificationMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE RIVET
center_to_center_distance_between_mounting_facilities_parallel_to_length0.375 INCHES NOMINAL0.375 INCHES NOMINAL IN
NSN5340-01-338-4538
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7138129-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 44
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE HANDLE
•
HANDLE HEIGHT: 2.785 INCHES NOMINAL2.785 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 0.375 INCHES NOMINAL0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY44
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE HANDLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE BUTTON
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE LOCKING MECHANISM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE PIN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE RIVET
HANDLE HEIGHT2.785 INCHES NOMINAL2.785 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH0.375 INCHES NOMINAL0.375 INCHES NOMINAL IN
MOUNTING METHODTHREADED HOLE(S)THREADED HOLE(S)
OVERALL LENGTH13.230 INCHES NOMINAL13.230 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
66667-2890Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7138129-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7138129-1?
7138129-1 is a HANDLE,MANUAL CONTROL.
What parts can replace 7138129-1?
There is 1 known substitute for 7138129-1: 66667-2890. Substitute compatibility should be verified for your specific system.
What is the NSN for 7138129-1?
7138129-1 is cataloged in the U.S. Government catalog under NSN 5340-01-338-4538. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7138129-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.