PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 713384
713384 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 304 BAND, overall_width: 0.375 INCHES NOMINAL IN, special_features: SUPPLIED W/TWO MTG BRACKETS, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-411-9369, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
713384
NSN: 5340-00-411-9369
FSC: 5340
CAGE: 82199 — ROHDE & SCHWARZ USA, INC. (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 304 BAND
overall_width0.375 INCHES NOMINAL IN
special_featuresSUPPLIED W/TWO MTG BRACKETS
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
material_document_and_classificationQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE BAND
NSN5340-00-411-9369
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 713384 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 304 BAND
•
STYLE DESIGNATOR: CENTER MOUNT
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.204 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.750 INCHES NOMINAL IN
MATERIALSTEEL COMP 304 BAND
STYLE DESIGNATORCENTER MOUNT
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE BAND
SPECIAL FEATURESSUPPLIED W/TWO MTG BRACKETS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
AB1-6493Interchangeable
interchangeable cross-reference
interchangeable
140-008-18Interchangeable
interchangeable cross-reference
interchangeable
126039Interchangeable
interchangeable cross-reference
interchangeable
36T21 S3773Interchangeable
interchangeable cross-reference
interchangeable
110-354Interchangeable
interchangeable cross-reference
interchangeable
SE11S6261Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 713384?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 713384?
713384 is a CLAMP,LOOP.
What parts can replace 713384?
There are 10 known substitutes for 713384: AB1-6493, 140-008-18, 126039 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 713384?
713384 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-411-9369. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 713384

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026