PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 713-3-1
713-3-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING HALF,SLEEVE is a the manufacturer industrial component. Key specifications include material: OIL LUBRICATING LUBRICATION, corner_shape: SQUARE ALL CORNERS, overall_length: 1.0600 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM IN, style_designator: HALF SLEEVE, PLAIN, NO OUTSIDE FLANGES, locking_lug_width: 0.1750 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN, surface_treatment: TIN ALLOY INSIDE DIAMETER SURFACE OF BODY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-216-9085, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
713-3-1
NSN: 5330-00-216-9085
FSC: 5330
CAGE: 35795 — LESLIE CONTROLS, INC. DBA LESLIE CONTROLS INC (USA)
SPECIFICATIONS
materialOIL LUBRICATING LUBRICATION
corner_shapeSQUARE ALL CORNERS
overall_length1.0600 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM IN
style_designatorHALF SLEEVE, PLAIN, NO OUTSIDE FLANGES
locking_lug_width0.1750 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN
surface_treatmentTIN ALLOY INSIDE DIAMETER SURFACE OF BODY
locking_lug_height0.0370 INCHES MINIMUM AND 0.0410 INCHES MAXIMUM IN
locking_lug_length0.1900 INCHES MINIMUM AND 0.2200 INCHES MAXIMUM IN
body_inside_diameter2.2315 INCHES MINIMUM AND 2.2324 INCHES MAXIMUM IN
body_outside_diameter2.3660 INCHES MINIMUM AND 2.3860 INCHES MAXIMUM IN
distance_from_lug_end_to_end_of_bearing0.2537 INCHES MINIMUM AND 0.2587 INCHES MAXIMUM IN
NSN5330-00-216-9085
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 713-3-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
53604Interchangeable
interchangeable cross-reference
interchangeable
200C 1-5/8Interchangeable
interchangeable cross-reference
interchangeable
1302Interchangeable
interchangeable cross-reference
interchangeable
90723-1Interchangeable
interchangeable cross-reference
interchangeable
10254Interchangeable
interchangeable cross-reference
interchangeable
UG537UInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 713-3-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 713-3-1?
713-3-1 is a BEARING HALF,SLEEVE.
What parts can replace 713-3-1?
There are 15 known substitutes for 713-3-1: 53604, 200C 1-5/8, 1302 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 713-3-1?
713-3-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-216-9085. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 713-3-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026