PartsTable
Technical Data Sheet
PartsTable / MRO / 712A
712A ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.1250 INCHES NOMINAL IN, overall_width: 13.000 INCHES NOMINAL IN, load_direction: RADIAL, overall_height: 10.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-019-6390, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 712A
NSN: 3110-00-019-6390
FSC: 3110
CAGE: 00607 — GAP INSTRUMENT CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
bore_diameter0.1250 INCHES NOMINAL IN
overall_width13.000 INCHES NOMINAL IN
load_directionRADIAL
overall_height10.500 INCHES NOMINAL IN
overall_length19.000 INCHES NOMINAL IN
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL
NSN3110-00-019-6390
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 712A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: OIL
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO. 7P
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
LOAD DIRECTION: RADIAL
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALOIL
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO. 7P
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
LOAD DIRECTIONRADIAL
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
SHIELD QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
B107.23MInterchangeable
interchangeable cross-reference
interchangeable
5120PL2170109Interchangeable
interchangeable cross-reference
interchangeable
2112081Interchangeable
interchangeable cross-reference
interchangeable
114445Interchangeable
interchangeable cross-reference
interchangeable
10-2433-1Interchangeable
interchangeable cross-reference
interchangeable
712AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 712A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 712A?
712A is a CAPACITOR,FIXED,PLASTIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 712A?
There are 17 known substitutes for 712A: B107.23M, 5120PL2170109, 2112081 and 14 more. Substitute compatibility should be verified for your specific system.
Is 712A still available?
712A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 712A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026