PartsTable
Technical Data Sheet
Download PDF

71288C — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

71288C: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.2910 INCHES NOMINAL IN, bore_diameter: 1.8750 INCHES NOMINAL IN, special_features: EXTRA CAPACITY AND INCREASED COMPLEMENT OF ROLLERS AND MODIFIED RETAINER, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0310 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-113-3801, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
71288C
NSN: 3110-00-113-3801
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.2910 INCHES NOMINAL IN
bore_diameter1.8750 INCHES NOMINAL IN
special_featuresEXTRA CAPACITY AND INCREASED COMPLEMENT OF ROLLERS AND MODIFIED RETAINER
style_designatorNORMAL ANGLE
cone_corner_radius0.0310 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-113-3801
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 71288C · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
•
CONE WIDTH: 1.2910 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.8750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0310 INCHES NOMINAL IN
CONE WIDTH1.2910 INCHES NOMINAL IN
SPECIAL FEATURESEXTRA CAPACITY AND INCREASED COMPLEMENT OF ROLLERS AND MODIFIED RETAINER
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.8750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
72188CReference document
Same NSN cross-reference
Reference document — Secondary reference
C1TZ4621AReference document
Same NSN cross-reference
Reference document — Secondary reference
Y716672Reference document
Same NSN cross-reference
Reference document — Secondary reference
9423511Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
9-049-103830Reference document
Same NSN cross-reference
Reference document — Secondary reference
716672Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 71288C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71288C?
71288C is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 71288C?
There are 6 known substitutes for 71288C: 72188C, C1TZ4621A, Y716672 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 71288C?
71288C is cataloged in the U.S. Government catalog under NSN 3110-00-113-3801. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71288C