PartsTable / COMPONENT / 712834
712834
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN, housing_bore_diameter: 2.062 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.281 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-9454, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
712834
NSN: 5330-00-285-9454 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN housing_bore_diameter 2.062 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 1.281 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-285-9454
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 712834
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• ACCOMMODATED SHAFT DIAMETER: 1.281 INCHES NOMINAL IN
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• HOUSING BORE DIAMETER: 2.062 INCHES NOMINAL IN
• SEAL WIDTH: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLE ANGULAR ACCOMMODATED SHAFT DIAMETER 1.281 INCHES NOMINAL IN MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT HOUSING BORE DIAMETER 2.062 INCHES NOMINAL IN CASE STYLE SQUARE SEAL WIDTH 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
50124 Interchangeable interchangeable cross-reference
interchangeable
7347279 Interchangeable interchangeable cross-reference
interchangeable
E429 Interchangeable interchangeable cross-reference
interchangeable
1115226 Interchangeable interchangeable cross-reference
interchangeable
712834 Interchangeable interchangeable cross-reference
interchangeable
SC-B-69379 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 712834?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 712834?
712834 is a PIN,SHOULDER,HEADLESS.
What parts can replace 712834?
There are 18 known substitutes for 712834: 50124, 7347279, E429 and 15 more. Substitute compatibility should be verified for your specific system.
Is 712834 still available?
712834 is currently cancelled.