PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 71282N
71282N ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: PLASTIC THUMBSCREW, special_features: THUMB SCREW/TEE BOLT IS PLASTIC, style_designator: T-BOLT, fastening_device_type: THUMB HEAD SCREW, end_item_identification: CENTRIFUGAL OIL FILTER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-505-0884, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
71282N
NSN: 5340-01-505-0884
FSC: 5340
CAGE: 0VP52 — FINCANTIERI MARINE SYSTEMS NORTH AMERICA, INC. DBA FINCANTIERI MARINE SYSTEMS NORTH AM (USA)
SPECIFICATIONS
materialPLASTIC THUMBSCREW
special_featuresTHUMB SCREW/TEE BOLT IS PLASTIC
style_designatorT-BOLT
fastening_device_typeTHUMB HEAD SCREW
end_item_identificationCENTRIFUGAL OIL FILTER
NSN5340-01-505-0884
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 71282N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC THUMBSCREW
•
STYLE DESIGNATOR: T-BOLT
•
FASTENING DEVICE TYPE: THUMB HEAD SCREW
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONCENTRIFUGAL OIL FILTER
MATERIALPLASTIC THUMBSCREW
MATERIALSTEEL CORROSION RESISTING BAND
STYLE DESIGNATORT-BOLT
FASTENING DEVICE TYPETHUMB HEAD SCREW
SPECIAL FEATURESTHUMB SCREW/TEE BOLT IS PLASTIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
4444958-5Interchangeable
interchangeable cross-reference
interchangeable
TRB-700Interchangeable
interchangeable cross-reference
interchangeable
503-120Interchangeable
interchangeable cross-reference
interchangeable
70670Interchangeable
interchangeable cross-reference
interchangeable
320951F93Interchangeable
interchangeable cross-reference
interchangeable
70670NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 71282N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71282N?
71282N is a CLAMP,LOOP.
What parts can replace 71282N?
There are 12 known substitutes for 71282N: 4444958-5, TRB-700, 503-120 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 71282N?
71282N is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-505-0884. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71282N

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026