PartsTable
Technical Data Sheet
Download PDF

712041 — BEARING,ROLLER,CYLINDRICAL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

712041: BEARING,ROLLER,CYLINDRICAL.

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 90.00 MILLIMETERS NOMINAL MM, overall_width: 73.00 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-159-9348, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
712041
NSN: 3110-00-159-9348
NIINs: 001599348, 004488696, 010212748
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter90.00 MILLIMETERS NOMINAL MM
overall_width73.00 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter190.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationLOOSE
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
internal_fit-up_contact_angular_directionOUTWARD CONVERGENT
NSN3110-00-159-9348
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 712041 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LOCATING FEATURE: NONLOCATING
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING WITH TWO ROLLER RETAINMENT RINGS ON OUTER, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 80.0 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
TECHNICAL CHARACTERISTICS
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOCATING FEATURENONLOCATING
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING WITH TWO ROLLER RETAINMENT RINGS ON OUTER, NON-SEPARABLE
OVERALL WIDTH1.1875 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER80.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
BORE DIAMETER40.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
SUBSTITUTES & CROSS-REFERENCES 3
U5208TSReference document
Same NSN cross-reference
Reference document — Secondary reference
MS5208Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
17388Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 712041?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 712041?
712041 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace 712041?
There are 3 known substitutes for 712041: U5208TS, MS5208, 17388. Substitute compatibility should be verified for your specific system.
What is the NSN for 712041?
712041 is cataloged in the U.S. Government catalog under NSN 3110-00-159-9348. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 712041

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.