PartsTable
Technical Data Sheet
Download PDF

712-085 — ADAPTER,ELECTRICAL CONDUIT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

712-085: ADAPTER,ELECTRICAL CONDUIT.

The ADAPTER,ELECTRICAL CONDUIT is a the manufacturer industrial component. Key specifications include end_type: UNTHREADED FIRST END, material: STEEL, hole_diameter: 2.588 INCHES MINIMUM AND 2.613 INCHES MAXIMUM IN, inside_diameter: 0.750 INCHES NOMINAL SECOND END IN, outside_diameter: 3.062 INCHES MINIMUM AND 3.092 INCHES MAXIMUM IN, style_designator: REDUCER. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-205-8244, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
712-085
NSN: 5310-00-205-8244
NIINs: 002058244, 015021907
FSC: 5310 — Nuts and Washers
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
end_typeUNTHREADED FIRST END
materialSTEEL
hole_diameter2.588 INCHES MINIMUM AND 2.613 INCHES MAXIMUM IN
inside_diameter0.750 INCHES NOMINAL SECOND END IN
outside_diameter3.062 INCHES MINIMUM AND 3.092 INCHES MAXIMUM IN
style_designatorREDUCER
surface_treatmentCADMIUM OR ZINC OR CHROMATE OVERALL
material_thickness1.063 INCHES NOMINAL IN
external_key_quantity19
end_item_identificationSHOP STORE NON STANDARD
conduit_type_accommodatedANY ACCEPTABLE SINGLE END
external_prebent_key_width0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
NSN5310-00-205-8244
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 712-085 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL PREBENT KEY WIDTH: 0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
•
OVERALL DISTANCE INCLUDING KEYS: 3.578 INCHES NOMINAL IN
•
STYLE DESIGNATOR: KEY
•
OUTSIDE DIAMETER: 3.062 INCHES MINIMUM AND 3.092 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 1.063 INCHES NOMINAL IN
•
EXTERNAL KEY QUANTITY: 19
•
INTERNAL PREBENT KEY LENGTH: 0.125 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OR CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
INTERNAL PREBENT KEY WIDTH0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
OVERALL DISTANCE INCLUDING KEYS3.578 INCHES NOMINAL IN
STYLE DESIGNATORKEY
OUTSIDE DIAMETER3.062 INCHES MINIMUM AND 3.092 INCHES MAXIMUM IN
MATERIAL THICKNESS1.063 INCHES NOMINAL IN
EXTERNAL KEY QUANTITY19
INTERNAL PREBENT KEY LENGTH0.125 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR ZINC OR CHROMATE OVERALL
EXTERNAL PREBENT KEY WIDTH0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
A-364TCN-57 ITEM 20Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS19070-132Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
12Z335-244Reference document
Same NSN cross-reference
Reference document — Secondary reference
M12555Reference document
Same NSN cross-reference
Reference document — Secondary reference
999-51813-0000Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 712-085?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 712-085?
712-085 is a ADAPTER,ELECTRICAL CONDUIT.
What parts can replace 712-085?
There are 5 known substitutes for 712-085: A-364TCN-57 ITEM 20, MS19070-132, 12Z335-244 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 712-085?
712-085 is cataloged in the U.S. Government catalog under NSN 5310-00-205-8244. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 712-085

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.