PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7119370
7119370 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 0.625 INCHES NOMINAL IN, housing_bore_diameter: 8.000 INCHES NOMINAL IN, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 7.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-711-9370, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7119370
NSN: 5330-00-711-9370
FSC: 5330
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width0.625 INCHES NOMINAL IN
housing_bore_diameter8.000 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter7.000 INCHES NOMINAL IN
NSN5330-00-711-9370
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7119370 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 7.000 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 8.000 INCHES NOMINAL IN
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEALING ELEMENT STYLE: VERTICAL
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER7.000 INCHES NOMINAL IN
HOUSING BORE DIAMETER8.000 INCHES NOMINAL IN
SEAL WIDTH0.625 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SEALING ELEMENT STYLEVERTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
7435-98W1Interchangeable
interchangeable cross-reference
interchangeable
3492Interchangeable
interchangeable cross-reference
interchangeable
115547Interchangeable
interchangeable cross-reference
interchangeable
4348PC185Interchangeable
interchangeable cross-reference
interchangeable
13191000 PIECE 66Interchangeable
interchangeable cross-reference
interchangeable
RC40SAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7119370?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7119370?
7119370 is a SEAL,PLAIN ENCASED.
What parts can replace 7119370?
There are 17 known substitutes for 7119370: 7435-98W1, 3492, 115547 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7119370?
7119370 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-711-9370. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7119370

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026