PartsTable
Technical Data Sheet
Download PDF

7117463-62 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7117463-62: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, nut_style: CLINCH, nut_height: 0.230 INCHES NOMINAL IN, pilot_length: 0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-01-126-3569, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7117463-62
NSN: 5310-01-126-3569
FSC: 5310 — Nuts and Washers
CAGE: 17863 — LITTON SYSTEMS INC GUIDANCE AND CONTROL SYSTEMS DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
nut_styleCLINCH
nut_height0.230 INCHES NOMINAL IN
pilot_length0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
nominal_thread_size0.086 INCHES IN
thread_quantity_per_inch56
NSN5310-01-126-3569
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7117463-62 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.086 INCHES IN
•
PILOT DIAMETER: 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.086 INCHES IN
PILOT DIAMETER0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
PILOT LENGTH0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
NUT HEIGHT0.230 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
B1532B1/8-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7117463-62?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7117463-62?
7117463-62 is a NUT,PLAIN,CLINCH.
What parts can replace 7117463-62?
There is 1 known substitute for 7117463-62: B1532B1/8-12. Substitute compatibility should be verified for your specific system.
What is the NSN for 7117463-62?
7117463-62 is cataloged in the U.S. Government catalog under NSN 5310-01-126-3569. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7117463-62

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.