PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 711698-132
711698-132 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.281 INCHES NOMINAL IN, height: 0.042 INCHES NOMINAL IN, length: 0.313 INCHES NOMINAL IN, material: STEEL COMP 1095, hole_diameter: 0.125 INCHES NOMINAL IN, furnished_items: LOCKNUT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-497-4586, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
711698-132
NSN: 5340-00-497-4586
FSC: 5340
CAGE: 05869 — RAYTHEON COMPANY DIV RMD STRATEGIC (USA)
SPECIFICATIONS
width0.281 INCHES NOMINAL IN
height0.042 INCHES NOMINAL IN
length0.313 INCHES NOMINAL IN
materialSTEEL COMP 1095
hole_diameter0.125 INCHES NOMINAL IN
furnished_itemsLOCKNUT
surface_treatmentCADMIUM
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-497-4586
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 711698-132 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM
•
HEIGHT: 0.042 INCHES NOMINAL IN
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL: STEEL COMP 1095
•
LENGTH: 0.313 INCHES NOMINAL IN
•
WIDTH: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM
HEIGHT0.042 INCHES NOMINAL IN
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 1095
LENGTH0.313 INCHES NOMINAL IN
WIDTH0.281 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
106814C1Interchangeable
interchangeable cross-reference
interchangeable
C-25Interchangeable
interchangeable cross-reference
interchangeable
602-51-104Interchangeable
interchangeable cross-reference
interchangeable
2940001419026Interchangeable
interchangeable cross-reference
interchangeable
83317CSInterchangeable
interchangeable cross-reference
interchangeable
SM7702PC37Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 711698-132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 711698-132?
711698-132 is a CLAMP,SYNCHRO.
What parts can replace 711698-132?
There are 20 known substitutes for 711698-132: 106814C1, C-25, 602-51-104 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 711698-132?
711698-132 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-497-4586. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 711698-132

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026