PartsTable
Technical Data Sheet
Download PDF

71164-75-100-S — RUBBER STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

71164-75-100-S: RUBBER STRIP.

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, special_features: MATERIAL IAW ZZ-R-765 CLASS 2A, GRADE 25 A, cross-sectional_width: 1.000 INCHES NOMINAL IN, cross-sectional_height: 0.750 INCHES NOMINAL IN, material_document_and_classification: ZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-464-9700, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
71164-75-100-S
NSN: 5330-01-464-9700
FSC: 5330 — Packing and Gasket Materials
CAGE: 4S908 — CHESAPEAKE BAY RUBBER & GASKET CO INC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
special_featuresMATERIAL IAW ZZ-R-765 CLASS 2A, GRADE 25 A
cross-sectional_width1.000 INCHES NOMINAL IN
cross-sectional_height0.750 INCHES NOMINAL IN
material_document_and_classificationZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE
NSN5330-01-464-9700
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 71164-75-100-S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 1.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.750 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH1.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURESMATERIAL IAW ZZ-R-765 CLASS 2A, GRADE 25 A
MATERIALRUBBER SILICONE CLASS Q
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 71164-75-100-S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71164-75-100-S?
71164-75-100-S is a RUBBER STRIP.
What is the NSN for 71164-75-100-S?
71164-75-100-S is cataloged in the U.S. Government catalog under NSN 5330-01-464-9700. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71164-75-100-S