PartsTable
Technical Data Sheet
Download PDF

7116368 — CLAMP,BLOCK,SECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7116368: CLAMP,BLOCK,SECTION.

The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, block_height: 3.420 INCHES MINIMUM AND 3.420 INCHES MINIMUM AND 3.440 INCHES MAXIMUM3.440 INCHES MAXIMUM IN, overall_width: 0.990 INCHES MINIMUM AND 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM1.010 INCHES MAXIMUM IN, overall_length: 6.990 INCHES MINIMUM AND 6.990 INCHES MINIMUM AND 7.010 INCHES MAXIMUM7.010 INCHES MAXIMUM IN, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S)UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-472-6757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7116368
NSN: 5340-01-472-6757
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
block_height3.420 INCHES MINIMUM AND 3.420 INCHES MINIMUM AND 3.440 INCHES MAXIMUM3.440 INCHES MAXIMUM IN
overall_width0.990 INCHES MINIMUM AND 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM1.010 INCHES MAXIMUM IN
overall_length6.990 INCHES MINIMUM AND 6.990 INCHES MINIMUM AND 7.010 INCHES MAXIMUM7.010 INCHES MAXIMUM IN
style_designatorRECTANGULAR
mounting_facilityUNTHREADED HOLE(S)UNTHREADED HOLE(S)
surface_treatmentPASSIVATE
clamping_hole_diameter0.782 INCHES NOMINAL FIRST HOLE IN
clamping_hole_quantity11
mounting_hole_diameter0.515 INCHES MINIMUM AND 0.515 INCHES MINIMUM AND 0.525 INCHES MAXIMUM0.525 INCHES MAXIMUM IN
mounting_hole_quantity22
surface_treatment_document_and_classificationASTMA967 ASSN STD SINGLE TREATMENT RESPONSE
NSN5340-01-472-6757
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7116368 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 22
•
CLAMPING HOLE QUANTITY: 11
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTMA967 ASSN STD SINGLE TREATMENT RESPONSE
•
BLOCK HEIGHT: 3.420 INCHES MINIMUM AND 3.420 INCHES MINIMUM AND 3.440 INCHES MAXIMUM3.440 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MOUNTING HOLE DIAMETER: 0.515 INCHES MINIMUM AND 0.515 INCHES MINIMUM AND 0.525 INCHES MAXIMUM0.525 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY22
CLAMPING HOLE QUANTITY11
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTMA967 ASSN STD SINGLE TREATMENT RESPONSE
BLOCK HEIGHT3.420 INCHES MINIMUM AND 3.420 INCHES MINIMUM AND 3.440 INCHES MAXIMUM3.440 INCHES MAXIMUM IN
STYLE DESIGNATORRECTANGULAR
MOUNTING HOLE DIAMETER0.515 INCHES MINIMUM AND 0.515 INCHES MINIMUM AND 0.525 INCHES MAXIMUM0.525 INCHES MAXIMUM IN
OVERALL LENGTH6.990 INCHES MINIMUM AND 6.990 INCHES MINIMUM AND 7.010 INCHES MAXIMUM7.010 INCHES MAXIMUM IN
OVERALL WIDTH0.990 INCHES MINIMUM AND 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM1.010 INCHES MAXIMUM IN
CLAMPING HOLE DIAMETER0.782 INCHES NOMINAL FIRST HOLE IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7116368?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7116368?
7116368 is a CLAMP,BLOCK,SECTION.
What is the NSN for 7116368?
7116368 is cataloged in the U.S. Government catalog under NSN 5340-01-472-6757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7116368

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.