PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 711625-45
711625-45 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.167 INCHES NOMINAL IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL, overall_width: 0.375 INCHES NOMINAL IN, special_features: COLOR: NATURAL, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-543-2891, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
711625-45
NSN: 5340-00-543-2891
FSC: 5340
CAGE: 05869 — RAYTHEON COMPANY DIV RMD STRATEGIC (USA)
SPECIFICATIONS
diameter0.167 INCHES NOMINAL IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
overall_width0.375 INCHES NOMINAL IN
special_featuresCOLOR: NATURAL
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.313 INCHES NOMINAL IN
material_document_and_classificationMIL-M-20693,COMP A,TYPE I MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.604 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.448 INCHES NOMINAL IN
NSN5340-00-543-2891
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 711625-45 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
•
LOOP INSIDE DIAMETER: 0.313 INCHES NOMINAL IN
•
DIAMETER: 0.167 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.604 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693,COMP A,TYPE I MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.448 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
LOOP INSIDE DIAMETER0.313 INCHES NOMINAL IN
DIAMETER0.167 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.604 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR: NATURAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693,COMP A,TYPE I MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.448 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
5-16-4Upgraded Successor
successor cross-reference
successor
10545219-2Upgraded Successor
successor cross-reference
successor
10140-26Upgraded Successor
successor cross-reference
successor
NAS1397P5NUpgraded Successor
successor cross-reference
successor
8317-2067-3Upgraded Successor
successor cross-reference
successor
KIT-002-32Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 711625-45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 711625-45?
711625-45 is a CLAMP,LOOP.
What parts can replace 711625-45?
There are 16 known substitutes for 711625-45: 5-16-4, 10545219-2, 10140-26 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 711625-45?
711625-45 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-543-2891. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 711625-45

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026