PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 711625-2
711625-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.172 INCHES NOMINAL IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-6306, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
711625-2
NSN: 5340-00-205-6306
FSC: 5340
CAGE: 05869 — RAYTHEON COMPANY DIV RMD STRATEGIC (USA)
SPECIFICATIONS
diameter0.172 INCHES NOMINAL IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.188 INCHES NOMINAL IN
material_document_and_classificationMIL-M-20693 TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.580 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.400 INCHES NOMINAL IN
NSN5340-00-205-6306
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 711625-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
•
DIAMETER: 0.188 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
•
APPLICATION/FUNCTION: USED AS CABLE CLAMP
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.373 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
SPECIFICATION/STANDARD DATA: 49956-214-1043 MANUFACTURERS SPECIFICATION CONTROL AND 97942-1JA7562 MANUFACTURERS SPECIFICATION CONTROL
•
SUPPLEMENTARY FEATURES: COLOR BLACK
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
DIAMETER0.188 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
APPLICATION/FUNCTIONUSED AS CABLE CLAMP
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.373 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
SPECIFICATION/STANDARD DATA49956-214-1043 MANUFACTURERS SPECIFICATION CONTROL AND 97942-1JA7562 MANUFACTURERS SPECIFICATION CONTROL
SUPPLEMENTARY FEATURESCOLOR BLACK
OVERALL WIDTH0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
5-16 6Upgraded Successor
successor cross-reference
successor
1JA7562H10Upgraded Successor
successor cross-reference
successor
CLN3-16Upgraded Successor
successor cross-reference
successor
3163Interchangeable
interchangeable cross-reference
interchangeable
TL7479Interchangeable
interchangeable cross-reference
interchangeable
7479Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 711625-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 711625-2?
711625-2 is a CLAMP,LOOP.
What parts can replace 711625-2?
There are 23 known substitutes for 711625-2: 5-16 6, 1JA7562H10, CLN3-16 and 20 more. Substitute compatibility should be verified for your specific system.
Is 711625-2 still available?
711625-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 711625-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026