PartsTable
Technical Data Sheet
Download PDF

71154 — CAPACITOR,FIXED,PAPER DIELECTRIC

✓ Government record, cited
Trust · MRO · MRO_GENERAL
PRODUCT OVERVIEW

71154: CAPACITOR,FIXED,PAPER DIELECTRIC.

- Control this LED spot wirelessly with all Trust Smart Home wireless wall switches, remote controls, etc.: no additional equipment needed - Save money with this energy efficient spot with an Energy rating of A+ - Warm light colour (2700k), suited as accent lighting for example, the living room. - Wide dimming range from 10 to 100% - Easy to install: place the spot in an existing MR-16 (GU5.3) light fixture - Also possible to control with your tablet and smartphone by using a Trust Smart Home control station - Light intensity of 350 lumen (5 Watt power equals 35 Watt traditional spot) - Cost effective solution: no additional dimmer required This part is cataloged in the U.S. Government catalog under NSN 5305-00-428-6527, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 71154
NSN: 5305-00-428-6527
NIINs: 004286527, 004839687, 005196848, 011934664, 012836439, 014427764
FSC: 5305 — Screws
CAGE: 95097 — LITTLE GIANT CRANE AND SHOVEL INC (USA)
SPECIFICATIONS
materialRUBBER NEOPRENE OVERALL
body_styleW/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE
body_width1.250 INCHES NOMINAL IN
head_styleFLAT COUNTERSUNK
body_height4.250 INCHES NOMINAL IN
body_length3.750 INCHES NOMINAL IN
temp_rating160.0 FAHRENHEIT DEGF
thread_class2A A
head_diameter0.660 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
thread_length0.471 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1008
fastener_length0.672 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN
NSN5305-00-428-6527
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 71154 · Trust ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: DICHROMATE ZINC
•
FASTENER LENGTH: 0.672 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.471 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN
•
HARDNESS RATING: 93.4 ROCKWELL C NOMINAL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTDICHROMATE ZINC
FASTENER LENGTH0.672 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.471 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN
HARDNESS RATING93.4 ROCKWELL C NOMINAL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 1008
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES 7
47386Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1913960Reference document
Same NSN cross-reference
Reference document — Secondary reference
1603114Reference document
Same NSN cross-reference
Reference document — Secondary reference
33686Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FF-S-92B TYPE I ST 2SReference document
Same NSN cross-reference
Reference document — Identification reference
3F379Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 71154?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71154?
71154 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Trust. It is classified as a MRO (MRO_GENERAL).
What parts can replace 71154?
There are 7 known substitutes for 71154: 47386, 1913960, 1603114 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 71154?
71154 is cataloged in the U.S. Government catalog under NSN 5305-00-428-6527. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71154

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.