PartsTable
Technical Data Sheet
Download PDF

71135-274 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

71135-274: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013, fastener_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-984-7342, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
71135-274
NSN: 5305-00-984-7342
FSC: 5305 — Screws
CAGE: 95097 — LITTLE GIANT CRANE AND SHOVEL INC (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationMRAP BUFFALO MK2A2
nominal_thread_diameter0.190 INCHES IN
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-984-7342
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 71135-274 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES
•
THREAD LENGTH: 0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.750 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES
THREAD LENGTH0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SUBSTITUTES & CROSS-REFERENCES 9
859080-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
1112Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AN510-10-12Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5305009847342Reference document
Same NSN cross-reference
Reference document — Informative reference only
446649Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
MS35191-274Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 71135-274?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71135-274?
71135-274 is a SCREW,MACHINE.
What parts can replace 71135-274?
There are 9 known substitutes for 71135-274: 859080-00, 1112, AN510-10-12 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 71135-274?
71135-274 is cataloged in the U.S. Government catalog under NSN 5305-00-984-7342. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71135-274

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.