PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 711311
711311 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

BLADE,COMPRESSOR,AIRCRAFT GAS TU. Key specifications include material: STEEL BLADE, design_type: COMPRESSOR, overall_width: 1.212 INCHES MINIMUM AND 1.222 INCHES MAXIMUM IN, overall_length: 3.072 INCHES MINIMUM AND 3.081 INCHES MAXIMUM IN, hardness_rating: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM BLADE, special_features: ORIGINAL NAME BLADE,COMPRESSOR ROTOR,TURBINE ENGINE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-427-4379, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
711311
NSN: 4720-00-427-4379
FSC: 4720
CAGE: 07334 — ITW INDUSTRIAL FINISHING DBA BINKS DEVILBISS (USA)
SPECIFICATIONS
materialSTEEL BLADE
design_typeCOMPRESSOR
overall_width1.212 INCHES MINIMUM AND 1.222 INCHES MAXIMUM IN
overall_length3.072 INCHES MINIMUM AND 3.081 INCHES MAXIMUM IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM BLADE
special_featuresORIGINAL NAME BLADE,COMPRESSOR ROTOR,TURBINE ENGINE
material_thickness0.493 INCHES MINIMUM AND 0.499 INCHES MAXIMUM IN
end_item_identificationENGINE MODEL J57
engine_section_locationCOMPRESSOR
criticality_code_justificationAGAV
material_document_and_classificationAMS5616 ASSN STD SINGLE MATERIAL RESPONSE BLADE
NSN4720-00-427-4379
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 711311 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 18.000 INCHES NOMINAL EXCLUDING END FITTINGS IN
•
NOMINAL THREAD SIZE: 0.375 INCHES FIRST END IN
•
CONNECTION STYLE: PLAIN OPTIONAL END FIRST END
•
INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: NPS FIRST END
•
EXTERIOR COLOR: RED
•
OPERATING PRESSURE: 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
OUTER COVERING ENVIRONMENTAL PROTECTION: OIL RESISTANT
TECHNICAL CHARACTERISTICS (FLIS)
MEASURING METHOD AND LENGTH18.000 INCHES NOMINAL EXCLUDING END FITTINGS IN
NOMINAL THREAD SIZE0.375 INCHES FIRST END IN
CONNECTION STYLEPLAIN OPTIONAL END FIRST END
INSIDE DIAMETER0.375 INCHES NOMINAL IN
THREAD SERIES DESIGNATORNPS FIRST END
EXTERIOR COLORRED
OPERATING PRESSURE250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
OUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED RAYON CORD AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE OR OUTER LAYER MOLDED RUBBER, NITRILE
OUTSIDE DIAMETER0.688 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
753011Interchangeable
interchangeable cross-reference
interchangeable
711311Interchangeable
interchangeable cross-reference
interchangeable
506511Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 711311?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 711311?
711311 is a BLADE,COMPRESSOR,AIRCRAFT GAS TU.
What parts can replace 711311?
There are 3 known substitutes for 711311: 753011, 711311, 506511. Substitute compatibility should be verified for your specific system.
What is the NSN for 711311?
711311 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-427-4379. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 711311

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026