PartsTable
Technical Data Sheet
Download PDF

7112FTE-964-P2 — PACKING ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7112FTE-964-P2: PACKING ASSEMBLY.

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN, material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING, inside_diameter: 0.496 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN, outside_diameter: 0.676 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN, special_features: TOP AND BOTTOM RETAINING RINGS:FLASH FREE, end_item_identification: 1520-01-599-2203. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-631-4845, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7112FTE-964-P2
NSN: 5330-01-631-4845
FSC: 5330 — Packing and Gasket Materials
CAGE: 5F573 — GREENE TWEED & CO INC (USA)
SPECIFICATIONS
height0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING
inside_diameter0.496 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
outside_diameter0.676 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN
special_featuresTOP AND BOTTOM RETAINING RINGS:FLASH FREE
end_item_identification1520-01-599-2203
cross-sectional_shape_styleTEE PACKING
material_document_and_classification(5F573) COMPOUND +2 (ARLON 07) MFR REF SINGLE MATERIAL RESPONSE RETAINER
part_name_assigned_by_controlling_agencyAGT ROD RING
NSN5330-01-631-4845
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7112FTE-964-P2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.676 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: (5F573) COMPOUND +2 (ARLON 07) MFR REF SINGLE MATERIAL RESPONSE RETAINER
•
CROSS-SECTIONAL SHAPE STYLE: TEE PACKING
•
INSIDE DIAMETER: 0.496 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
•
HEIGHT: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER0.676 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION(5F573) COMPOUND +2 (ARLON 07) MFR REF SINGLE MATERIAL RESPONSE RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION(5F573) COMPOUND 964 MFR REF SINGLE MATERIAL RESPONSE PACKING
CROSS-SECTIONAL SHAPE STYLETEE PACKING
CROSS-SECTIONAL SHAPE STYLESPECIAL RETAINER
INSIDE DIAMETER0.496 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
HEIGHT0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
SPECIAL FEATURESTOP AND BOTTOM RETAINING RINGS:FLASH FREE
PART NAME ASSIGNED BY CONTROLLING AGENCYAGT ROD RING
END ITEM IDENTIFICATION1520-01-599-2203
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7112FTE-964-P2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7112FTE-964-P2?
7112FTE-964-P2 is a PACKING ASSEMBLY.
What is the NSN for 7112FTE-964-P2?
7112FTE-964-P2 is cataloged in the U.S. Government catalog under NSN 5330-01-631-4845. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7112FTE-964-P2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.