PartsTable
Technical Data Sheet
Download PDF

7112-MS-964-5708 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7112-MS-964-5708: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, peripheral_diameter: 0.676 INCHES MINIMUM AND 0.677 INCHES MAXIMUM IN, center_hole_diameter: 0.500 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN, cross-sectional_height: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN, cross-sectional_shape_style: TEE, material_document_and_classification: MIL-P-8346 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-351-5183, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7112-MS-964-5708
NSN: 5330-01-351-5183
FSC: 5330 — Packing and Gasket Materials
CAGE: 5F573 — GREENE TWEED & CO INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
peripheral_diameter0.676 INCHES MINIMUM AND 0.677 INCHES MAXIMUM IN
center_hole_diameter0.500 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN
cross-sectional_height0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
cross-sectional_shape_styleTEE
material_document_and_classificationMIL-P-8346 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-351-5183
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7112-MS-964-5708 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-8346 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: TEE
•
PERIPHERAL DIAMETER: 0.676 INCHES MINIMUM AND 0.677 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.500 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-8346 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLETEE
PERIPHERAL DIAMETER0.676 INCHES MINIMUM AND 0.677 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.500 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
4679-112Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
7112MS-964-TReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5905169-2Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7112-MS-964-5708?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7112-MS-964-5708?
7112-MS-964-5708 is a RETAINER,PACKING.
What parts can replace 7112-MS-964-5708?
There are 3 known substitutes for 7112-MS-964-5708: 4679-112, 7112MS-964-T, 5905169-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 7112-MS-964-5708?
7112-MS-964-5708 is cataloged in the U.S. Government catalog under NSN 5330-01-351-5183. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7112-MS-964-5708

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.