PartsTable
Technical Data Sheet
Download PDF

711067 — RELAY,ELECTROMAGNETIC

✓ Government record, cited
Intellinet · MRO · MRO_GENERAL
PRODUCT OVERVIEW

711067: RELAY,ELECTROMAGNETIC.

The RELAY,ELECTROMAGNETIC is a Intellinet industrial component. Key specifications include duty_type: CONTINUOUS, nut_style: ROUND, time_delay: 0.0108 SECONDS NOMINAL FIXED OPERATE TIME, nut_diameter: 0.980 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, thread_class: 2A SINGLE MOUNTING FACILITY A, nut_thickness: 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-225-8309, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 711067
NSN: 5310-00-225-8309
NIINs: 002258309, 010408839, 012336564, 014189799
FSC: 5310 — Nuts and Washers
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
duty_typeCONTINUOUS
nut_styleROUND
time_delay0.0108 SECONDS NOMINAL FIXED OPERATE TIME
nut_diameter0.980 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
thread_class2A SINGLE MOUNTING FACILITY A
coil_quantity2
nut_thickness0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
overall_width1.750 INCHES MAXIMUM IN
thread_seriesUNS
overall_height2.469 INCHES MINIMUM AND 2.531 INCHES MAXIMUM IN
overall_length3.812 INCHES MAXIMUM IN
hardness_rating66.0 ROCKWELL B MINIMUM AND 92.0 ROCKWELL B MAXIMUM
NSN5310-00-225-8309
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 711067 · Intellinet ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 3RD TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNS
•
HARDNESS RATING: 66.0 ROCKWELL B MINIMUM AND 92.0 ROCKWELL B MAXIMUM
•
THREAD PITCH DIAMETERS: +0.5657 TO 0.5687 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
DRIVE POINT WIDTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.586 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 3RD TREATMENT RESPONSE OVERALL
THREAD SERIESUNS
HARDNESS RATING66.0 ROCKWELL B MINIMUM AND 92.0 ROCKWELL B MAXIMUM
THREAD PITCH DIAMETERS+0.5657 TO 0.5687 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
DRIVE POINT WIDTH0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.586 INCHES IN
NUT DIAMETER0.980 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.094 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
BACN10AP02Reference document
Same NSN cross-reference
Reference document — Secondary reference
TN02Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
12Z335-203Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS19068-022Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
N02ZINCC0ATEDReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 711067?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 711067?
711067 is a RELAY,ELECTROMAGNETIC manufactured by Intellinet. It is classified as a MRO (MRO_GENERAL).
What parts can replace 711067?
There are 5 known substitutes for 711067: BACN10AP02, TN02, 12Z335-203 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 711067?
711067 is cataloged in the U.S. Government catalog under NSN 5310-00-225-8309. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 711067

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.