PartsTable
Technical Data Sheet
Download PDF

711003 — FUSEHOLDER,BLOCK

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

711003: FUSEHOLDER,BLOCK.

The FUSEHOLDER,BLOCK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 511 CONTACT, nut_style: ROUND, body_style: CLIP CONNECTED TYPE, nut_diameter: 2.250 INCHES NOMINAL IN, nut_thickness: 0.4375 INCHES NOMINAL IN, overall_width: 2.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-185-6530, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 711003
NSN: 5310-00-185-6530
NIINs: 001856530, 004021752, 013937610, 014209964
FSC: 5310 — Nuts and Washers
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialCOPPER ALLOY 511 CONTACT
nut_styleROUND
body_styleCLIP CONNECTED TYPE
nut_diameter2.250 INCHES NOMINAL IN
nut_thickness0.4375 INCHES NOMINAL IN
overall_width2.000 INCHES NOMINAL IN
thread_seriesUN
base_thickness0.375 INCHES NOMINAL IN
coating_methodPLATED CONTACT
overall_height3.000 INCHES NOMINAL IN
overall_length12.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
NSN5310-00-185-6530
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 711003 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UN
•
THREAD PITCH DIAMETERS: +1.5269 TO 1.5314 INCHES IN
•
DRIVE POINT WIDTH: 0.250 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.562 INCHES IN
•
NUT DIAMETER: 2.250 INCHES NOMINAL IN
•
DRIVE POINT DEPTH: 0.0937 INCHES NOMINAL IN
•
NUT THICKNESS: 0.4375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUN
THREAD PITCH DIAMETERS+1.5269 TO 1.5314 INCHES IN
DRIVE POINT WIDTH0.250 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.562 INCHES IN
NUT DIAMETER2.250 INCHES NOMINAL IN
DRIVE POINT DEPTH0.0937 INCHES NOMINAL IN
NUT THICKNESS0.4375 INCHES NOMINAL IN
DRIVE POINT QUANTITY8
NUT STYLEROUND
SUBSTITUTES & CROSS-REFERENCES 2
1ES12660Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8N08Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 711003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 711003?
711003 is a FUSEHOLDER,BLOCK. It is classified as a MRO (MRO_GENERAL).
What parts can replace 711003?
There are 2 known substitutes for 711003: 1ES12660, 8N08. Substitute compatibility should be verified for your specific system.
What is the NSN for 711003?
711003 is cataloged in the U.S. Government catalog under NSN 5310-00-185-6530. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 711003