PartsTable
Technical Data Sheet
PartsTable / MRO / 711-040
711-040 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The ADAPTER,SWITCH ACTUATOR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 1.000 INCHES NOMINAL IN, nut_thickness: 0.312 INCHES NOMINAL IN, thread_series: UNS, mounting_method: BRACKET(S). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-185-6538, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 711-040
NSN: 5310-00-185-6538
FSC: 5310
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter1.000 INCHES NOMINAL IN
nut_thickness0.312 INCHES NOMINAL IN
thread_seriesUNS
mounting_methodBRACKET(S)
special_featuresTUNGSTEN CARBIDE; 1.781 IN. O/A LG; 0.250 IN. BORE DIA; 0.875 IN. BARREL DIA; 0.740-14 NPT ON ONE END IN
thread_directionRIGHT-HAND
drive_point_depth0.0937 INCHES NOMINAL IN
drive_point_width0.125 INCHES NOMINAL IN
features_providedADJUSTABLE
nominal_thread_size0.586 INCHES IN
NSN5310-00-185-6538
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 711-040 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DRIVE POINT QUANTITY: 8
•
NUT DIAMETER: 1.000 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.586 INCHES IN
•
THREAD QUANTITY PER INCH: 32
•
THREAD SERIES: UNS
•
NUT STYLE: ROUND
•
THREAD PITCH DIAMETERS: +0.5657 TO 0.5687 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
DRIVE POINT QUANTITY8
NUT DIAMETER1.000 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.586 INCHES IN
THREAD QUANTITY PER INCH32
THREAD SERIESUNS
NUT STYLEROUND
THREAD PITCH DIAMETERS+0.5657 TO 0.5687 INCHES IN
THREAD DIRECTIONRIGHT-HAND
DRIVE POINT DEPTH0.0937 INCHES NOMINAL IN
DRIVE POINT WIDTH0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
605510-100Interchangeable
interchangeable cross-reference
interchangeable
715065-101Interchangeable
interchangeable cross-reference
interchangeable
70-1040Interchangeable
interchangeable cross-reference
interchangeable
PT4Interchangeable
interchangeable cross-reference
interchangeable
711-040Interchangeable
interchangeable cross-reference
interchangeable
3J922Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 711-040?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 711-040?
711-040 is a ADAPTER,SWITCH ACTUATOR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 711-040?
There are 7 known substitutes for 711-040: 605510-100, 715065-101, 70-1040 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 711-040?
711-040 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-185-6538. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 711-040

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026