PartsTable
Technical Data Sheet
PartsTable / MRO / 71091

71091 — Cable Assembly Specs

✓ Verified by PartsTable
Trust · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

- Can easily be placed anywhere outdoor with included double sided tape and/or screws<br>- Saves energy: since lights/devices are switched off automatically after 5 seconds or 1, 5 or 10 minutes<br>- IP44 waterproof<br>- Long battery life (battery not included)<br>- Transmission range up to 30 meters<br>- Can be combined with a wireless doorbell so you can hear when motion is detected This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-252-1403, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 71091
NSN: 5999-01-252-1403
FSC: 5999
CAGE: 52316 — KEASTER PRODUCTS, INCORPORATED (USA)
SPECIFICATIONS
inside_width4.125 INCHES NOMINAL IN
inside_length9.500 INCHES NOMINAL IN
style_designatorCIRCULAR
supplementary_featuresULTRA LIME
end_item_identificationLIGHT ARMORED VEHICLE
part_name_assigned_by_controlling_agencyGASKET, BASE
post-consumer_recovered_materials_percentage30.0
NSN5999-01-252-1403
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 71091 MFR Trust PANEL,STRUCTURAL,AIRCRAFT
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.583 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: WIRE AND COMPOSITION
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.208 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
BOLT HOLE QUANTITY: 4
•
MATERIAL: UNABLE TO DECODE
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.208 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.583 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEWIRE AND COMPOSITION
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.208 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
BOLT HOLE QUANTITY4
MATERIALUNABLE TO DECODE
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.208 INCHES NOMINAL IN
OVERALL WIDTH2.000 INCHES NOMINAL IN
OUTSIDE CORNER INVERTED RADIUS0.387 INCHES MINIMUM AND 0.402 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
74030Interchangeable
interchangeable cross-reference
interchangeable
TE11541Interchangeable
interchangeable cross-reference
interchangeable
7053Interchangeable
interchangeable cross-reference
interchangeable
722803-029Interchangeable
interchangeable cross-reference
interchangeable
PN61778Interchangeable
interchangeable cross-reference
interchangeable
GE-60-TE-2RSInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMATSourcing: other
Ready to buy 71091?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71091?
71091 is a PANEL,STRUCTURAL,AIRCRAFT manufactured by Trust. It is classified as a MRO (MRO_GENERAL).
What parts can replace 71091?
There are 13 known substitutes for 71091: 74030, TE11541, 7053 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 71091?
71091 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-252-1403. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71091

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026