PartsTable
Technical Data Sheet
Download PDF

7108906 — CAM,CONTROL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7108906: CAM,CONTROL.

The CAM,CONTROL is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 500 OVERALL, head_style: FLAT CHAMFER, head_height: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN, thread_length: 1.00 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-476-7598, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7108906
NSN: 5310-01-476-7598
NIINs: 014767598, 014834568, 014886202, 017341478, 017342426, 017342449, 017345696, 017356162
FSC: 5310 — Nuts and Washers
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialNICKEL ALLOY 500 OVERALL
head_styleFLAT CHAMFER
head_height0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
thread_length1.00 INCHES NOMINAL IN
fastener_length3.25 INCHES NOMINAL IN
hardness_rating24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
locking_featureSELF-LOCKING LOCKING FEATURE
special_featuresSELF LOCKING ELEMENTS IN ACCORDANCE WITH MIL-F-8961 OR MIL-DTL-18240
thread_directionRIGHT-HAND
width_across_flats0.312 INCHES NOMINAL IN
NSN5310-01-476-7598
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7108906 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 1
845-7108906 ITEM 13Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7108906?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7108906?
7108906 is a CAM,CONTROL.
What parts can replace 7108906?
There is 1 known substitute for 7108906: 845-7108906 ITEM 13. Substitute compatibility should be verified for your specific system.
What is the NSN for 7108906?
7108906 is cataloged in the U.S. Government catalog under NSN 5310-01-476-7598. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7108906