PartsTable
Technical Data Sheet
Download PDF

710876-7 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

710876-7: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.172 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.375 INCHES NOMINAL IN, special_features: NATURAL COLOR, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-686-1302, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
710876-7
NSN: 5340-00-686-1302
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
diameter0.172 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.375 INCHES NOMINAL IN
special_featuresNATURAL COLOR
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.438 INCHES NOMINAL IN
specification/standard_data80205-NAS1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationL-P-410 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.720 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.540 INCHES NOMINAL IN
NSN5340-00-686-1302
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 710876-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-410 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.172 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.720 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 80205-NAS1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-410 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.172 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.720 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA80205-NAS1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SPECIAL FEATURESNATURAL COLOR
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.540 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 4
NAS1397Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
630Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
610-0107Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
HW-C0003-013Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 710876-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 710876-7?
710876-7 is a CLAMP,LOOP.
What parts can replace 710876-7?
There are 4 known substitutes for 710876-7: NAS1397, 630, 610-0107 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 710876-7?
710876-7 is cataloged in the U.S. Government catalog under NSN 5340-00-686-1302. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 710876-7