PartsTable
Technical Data Sheet
71077 ✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

- Standard filter for colour photos in the open air<br>- Removes haze e.g. in case of shots at the sea or in high mountain regions<br>- Avoids blue cast<br>- Blocks ultraviolet rays up to 365 nm<br>- Mired value +10<br>- At the same time protection of the lens against scratches, dust and finger-marks<br>- Quality standard (glass): standard<br><br>- Impact of picture:<br>- Pleasant, high-contrast colours with warmer character, specially for landscape and town shots<br>- Horizon and subjects which are farer away are sharp and clear This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-371-7114, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
71077
NSN: 5310-00-371-7114
FSC: 5310
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
body_width0.400 INCHES NOMINAL IN
body_height0.480 INCHES NOMINAL IN
body_length0.400 INCHES NOMINAL IN
rating_methodELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING
turn_quantity6-1/4 SINGLE COMPONENT SINGLE WINDING
coil_form_typeHOLLOW SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
quality_factor70 MINIMUM SINGLE COMPONENT SINGLE WINDING
mounting_methodTERMINAL SINGLE GROUP
core_constructionPOWDERED SINGLE COMPONENT
inductance_rating0.297 MICROHENRIES MINIMUM AND 0.363 MICROHENRIES MAXIMUM SINGLE COMPONENT SINGLE WINDING
reliability_indicatorNOT ESTABLISHED
NSN5310-00-371-7114
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 71077 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
558-7107-07-00-00Interchangeable
interchangeable cross-reference
interchangeable
AC8178-230Interchangeable
interchangeable cross-reference
interchangeable
CDD4370-07Interchangeable
interchangeable cross-reference
interchangeable
201299Interchangeable
interchangeable cross-reference
interchangeable
16776620-006Interchangeable
interchangeable cross-reference
interchangeable
16779780Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 71077?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71077?
71077 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Hama.
What parts can replace 71077?
There are 12 known substitutes for 71077: 558-7107-07-00-00, AC8178-230, CDD4370-07 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 71077?
71077 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-371-7114. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71077