PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 710749

710749 — Technical Data Sheet

✓ Verified by PartsTable
Intellinet · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Compact wall enclosure with removable panels for easy installation.<br>- Safety glass door which can be easily removed and opens more than 180°.<br>- Two apertures allow cable entry from floor level or from the roof where a ventilation kit can be installed.<br>- Slots for ventilation on top and bottom part.<br>- Color: gray.<br>- Made in EU.<br>- Three-Year Warranty. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-5302, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
710749
NSN: 3110-00-554-5302
FSC: 3110
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width0.400 INCHES NOMINAL IN
bore_shapeSTRAIGHT
body_height0.500 INCHES NOMINAL IN
body_length0.400 INCHES NOMINAL IN
bore_diameter40.0 MILLIMETERS NOMINAL MM
overall_width18.0 MILLIMETERS NOMINAL MM
coil_form_typeHOLLOW SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
load_directionRADIAL
quality_factor35 MAXIMUM SINGLE COMPONENT SINGLE WINDING
surface_finishGROUND
NSN3110-00-554-5302
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 710749 · Intellinet ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 40.0 MILLIMETERS NOMINAL MM
•
SURFACE FINISH: GROUND
•
LOAD DIRECTION: RADIAL
•
OVERALL OUTSIDE DIAMETER: 80.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
STANDARD TOLERANCE DESIGNATIONABEC NO.1
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
BORE DIAMETER40.0 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
OVERALL OUTSIDE DIAMETER80.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH18.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
8146-32Interchangeable
interchangeable cross-reference
interchangeable
840-WC-22Interchangeable
interchangeable cross-reference
interchangeable
840-05Interchangeable
interchangeable cross-reference
interchangeable
32-45004-47Interchangeable
interchangeable cross-reference
interchangeable
2156104-5Interchangeable
interchangeable cross-reference
interchangeable
76154Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 710749?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 710749?
710749 is a COIL,RADIO FREQUENCY manufactured by Intellinet.
What parts can replace 710749?
There are 32 known substitutes for 710749: 8146-32, 840-WC-22, 840-05 and 29 more. Substitute compatibility should be verified for your specific system.
Is 710749 still available?
710749 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 710749

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026