PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 710726DA
710726DA ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC VINYL, design_type: FRICTION, inside_diameter_length: 1.000 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 0.093 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-258-4864, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
710726DA
NSN: 5340-01-258-4864
FSC: 5340
CAGE: 25205 — MOLDED DEVICES, INC. DBA MDI DIV MOLDED DEVICES (USA)
SPECIFICATIONS
materialPLASTIC VINYL
design_typeFRICTION
inside_diameter_length1.000 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed0.093 INCHES NOMINAL IN
NSN5340-01-258-4864
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 710726DA MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.093 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
DESIGN TYPE: FRICTION
•
MATERIAL: PLASTIC VINYL
•
INSIDE DIAMETER LENGTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.093 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
DESIGN TYPEFRICTION
MATERIALPLASTIC VINYL
INSIDE DIAMETER LENGTH1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
710726Interchangeable
interchangeable cross-reference
interchangeable
702369AND710726Interchangeable
interchangeable cross-reference
interchangeable
06365-26Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 710726DA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 710726DA?
710726DA is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 710726DA?
There are 3 known substitutes for 710726DA: 710726, 702369AND710726, 06365-26. Substitute compatibility should be verified for your specific system.
What is the NSN for 710726DA?
710726DA is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-258-4864. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 710726DA

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026