PartsTable
Technical Data Sheet
Download PDF

7106841 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7106841: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.094 INCHES NOMINAL IN, diameter: 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, material: STEEL COMP 1018 OR STEEL COMP 1022 OVERALL, head_style: FLAT, chamfer_length: 0.062 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-710-6841, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7106841
NSN: 5315-00-710-6841
NIINs: 007106841, 010762895
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
height0.094 INCHES NOMINAL IN
diameter0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
materialSTEEL COMP 1018 OR STEEL COMP 1022 OVERALL
head_styleFLAT
chamfer_length0.062 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.375 INCHES NOMINAL IN
surface_treatmentPHOSPHATE OVERALL
under_head_length0.922 INCHES NOMINAL IN
first_hole_diameter0.073 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-710-6841
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7106841 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.062 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 0.922 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.073 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.375 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.062 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH0.922 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.073 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
DIAMETER0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
HEAD STYLEFLAT
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7106841?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7106841?
7106841 is a PIN,STRAIGHT,HEADED.
What is the NSN for 7106841?
7106841 is cataloged in the U.S. Government catalog under NSN 5315-00-710-6841. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7106841

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.