PartsTable
Technical Data Sheet
Download PDF

710569 — INSULATOR,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

710569: INSULATOR,PLATE.

The INSULATOR,PLATE is a the manufacturer industrial component. Key specifications include material: PLASTIC EPOXY AND FIBERGLASS OVERALL, recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 0.250 INCHES NOMINAL IN, overall_width: 2.680 INCHES NOMINAL IN, overall_height: 0.010 INCHES NOMINAL IN, overall_length: 7.810 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-017-0695, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
710569
NSN: 5310-01-017-0695
NIINs: 010170695, 013744490, 015455834
FSC: 5310 — Nuts and Washers
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC EPOXY AND FIBERGLASS OVERALL
recess_angle90.0 DEGREES NOMINAL
hole_diameter0.250 INCHES NOMINAL IN
overall_width2.680 INCHES NOMINAL IN
overall_height0.010 INCHES NOMINAL IN
overall_length7.810 INCHES NOMINAL IN
recess_diameter0.281 INCHES NOMINAL IN
outside_diameter1.277 INCHES NOMINAL IN
style_designatorRECESSED
material_thickness0.125 INCHES NOMINAL IN
material_document_and_classificationMIL-P-18177, TYPE GEE - CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-017-0695
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 710569 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECESSED
•
OUTSIDE DIAMETER: 1.277 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
RECESS DIAMETER: 0.281 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
RECESS ANGLE: 90.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORRECESSED
OUTSIDE DIAMETER1.277 INCHES NOMINAL IN
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
RECESS DIAMETER0.281 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.250 INCHES NOMINAL IN
RECESS ANGLE90.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 710569?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 710569?
710569 is a INSULATOR,PLATE.
What is the NSN for 710569?
710569 is cataloged in the U.S. Government catalog under NSN 5310-01-017-0695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 710569

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.