PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 710519
710519 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

TONER,DIRECT ELECTROSTATIC PROCE. Key specifications include physical_form: POWDER, special_features: USE WITH HP LASERJET 4 AND 4M LASER PRINTERS, unit_package_content_form: PREMIXED UNIT, environmental_attribute_code: COMPREHENSIVE PROCUREMENT GUIDELINE - NON-PAPER OFFICE PRODUCTS - TONER CARTRIDGES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-919-9739, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
710519
NSN: 5330-00-919-9739
FSC: 5330
CAGE: 0AHU0 — KALMAR AC INC (USA)
SPECIFICATIONS
physical_formPOWDER
special_featuresUSE WITH HP LASERJET 4 AND 4M LASER PRINTERS
unit_package_content_formPREMIXED UNIT
environmental_attribute_codeCOMPREHENSIVE PROCUREMENT GUIDELINE - NON-PAPER OFFICE PRODUCTS - TONER CARTRIDGES
NSN5330-00-919-9739
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 710519 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: USED ON INJECTION PUMP
TECHNICAL CHARACTERISTICS (FLIS)
GENERAL CHARACTERISTICS ITEM DESCRIPTIONUSED ON INJECTION PUMP
END ITEM IDENTIFICATIONALLIS-CHALMERS CORP,MOTOR GRADER MODEL M100
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
4048596Interchangeable
interchangeable cross-reference
interchangeable
10519Interchangeable
interchangeable cross-reference
interchangeable
600002Interchangeable
interchangeable cross-reference
interchangeable
TC-EP-EInterchangeable
interchangeable cross-reference
interchangeable
866-440-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 710519?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 710519?
710519 is a TONER,DIRECT ELECTROSTATIC PROCE.
What parts can replace 710519?
There are 5 known substitutes for 710519: 4048596, 10519, 600002 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 710519?
710519 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-919-9739. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 710519

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026