PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 710420-7
710420-7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.1875 INCHES NOMINAL IN, overall_width: 0.2500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-5872, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
710420-7
NSN: 3110-00-112-5872
FSC: 3110
CAGE: 05869 — RAYTHEON COMPANY DIV RMD STRATEGIC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.1875 INCHES NOMINAL IN
overall_width0.2500 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.3437 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-112-5872
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 710420-7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 0.1875 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 0.3437 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
MATERIALSTEEL OVERALL
BORE DIAMETER0.1875 INCHES NOMINAL IN
SURFACE FINISHGROUND
OVERALL WIDTH0.2500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.3437 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
203781Interchangeable
interchangeable cross-reference
interchangeable
710420-7Interchangeable
interchangeable cross-reference
interchangeable
B52Interchangeable
interchangeable cross-reference
interchangeable
B107.16Interchangeable
interchangeable cross-reference
interchangeable
2073113Interchangeable
interchangeable cross-reference
interchangeable
2WE123Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 710420-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 710420-7?
710420-7 is a BEARING,ROLLER,NEEDLE.
What parts can replace 710420-7?
There are 19 known substitutes for 710420-7: 203781, 710420-7, B52 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 710420-7?
710420-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-5872. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 710420-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026