PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 710192
710192 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 2.2500 INCHES NOMINAL IN, overall_width: 0.6250 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-159-9061, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
710192
NSN: 3110-00-159-9061
FSC: 3110
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter2.2500 INCHES NOMINAL IN
overall_width0.6250 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter3.5625 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data115 TYPE AND 00 GRADE
NSN3110-00-159-9061
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 710192 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 3.5625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
LUBRICATION MATERIAL: GREASE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY OVERALL OUTSIDE DIAMETER AND BY SHIELD,QUANTITY
•
NONDEFINITIVE SPEC/STD DATA: 115 TYPE AND 00 GRADE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER3.5625 INCHES NOMINAL IN
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
LUBRICATION MATERIALGREASE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY OVERALL OUTSIDE DIAMETER AND BY SHIELD,QUANTITY
NONDEFINITIVE SPEC/STD DATA115 TYPE AND 00 GRADE
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
FFB171Interchangeable
interchangeable cross-reference
interchangeable
XLS1 3-4FFInterchangeable
interchangeable cross-reference
interchangeable
A-A-59646Interchangeable
interchangeable cross-reference
interchangeable
I70551Interchangeable
interchangeable cross-reference
interchangeable
205885-9Interchangeable
interchangeable cross-reference
interchangeable
XLS4 1-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 710192?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 710192?
710192 is a BEARING,BALL,ANNULAR.
What parts can replace 710192?
There are 21 known substitutes for 710192: FFB171, XLS1 3-4FF, A-A-59646 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 710192?
710192 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-159-9061. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 710192

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026