PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 710147
710147 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 45.00 MILLIMETERS NOMINAL MM, overall_width: 29.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-153-9249, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
710147
NSN: 5340-00-153-9249
FSC: 5340
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter45.00 MILLIMETERS NOMINAL MM
overall_width29.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity1
special_featuresADDITIONAL ALTERNATE MATERIALS: ALUMINUM ALLOY A712, B443, B514, B850, D712, 208, 222, 242, 295, 328, 443, 514, 520, 771 OR 850
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter120.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN5340-00-153-9249
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 710147 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY A850.0 OR ALUMINUM ALLOY 319.0 OR ALUMINUM ALLOY 355.0 OR ALUMINUM ALLOY 356.0 OR ALUMINUM ALLOY 535.0 OR ALUMINUM ALLOY 705.0 OR ALUMINUM ALLOY 707.0 OR ALUMINUM ALLOY 713.0
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-601 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY A850.0 OR ALUMINUM ALLOY 319.0 OR ALUMINUM ALLOY 355.0 OR ALUMINUM ALLOY 356.0 OR ALUMINUM ALLOY 535.0 OR ALUMINUM ALLOY 705.0 OR ALUMINUM ALLOY 707.0 OR ALUMINUM ALLOY 713.0
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-601 FED SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURESADDITIONAL ALTERNATE MATERIALS: ALUMINUM ALLOY A712, B443, B514, B850, D712, 208, 222, 242, 295, 328, 443, 514, 520, 771 OR 850
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
MT409PInterchangeable
interchangeable cross-reference
interchangeable
87542-1704ITEM17Interchangeable
interchangeable cross-reference
interchangeable
3T079AInterchangeable
interchangeable cross-reference
interchangeable
708562Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 710147?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 710147?
710147 is a BEARING,BALL,ANNULAR.
What parts can replace 710147?
There are 4 known substitutes for 710147: MT409P, 87542-1704ITEM17, 3T079A and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 710147?
710147 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-153-9249. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 710147

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026