PartsTable
Technical Data Sheet
PartsTable / MRO / 710126
710126 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include material: STEEL OVERALL, body_style: W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE, body_width: 1.188 INCHES NOMINAL IN, bore_shape: STRAIGHT, body_height: 2.250 INCHES NOMINAL IN, body_length: 1.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8204, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 710126
NSN: 3110-00-151-8204
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleW/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE
body_width1.188 INCHES NOMINAL IN
bore_shapeSTRAIGHT
body_height2.250 INCHES NOMINAL IN
body_length1.188 INCHES NOMINAL IN
bore_diameter8.00 MILLIMETERS NOMINAL MM
overall_width0.4060 INCHES NOMINAL IN
seal_quantity1
load_directionRADIAL
surface_finishGROUND
shield_quantity1
NSN3110-00-151-8204
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 710126 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 8.00 MILLIMETERS NOMINAL MM
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
SHIELD QUANTITY: 1
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER8.00 MILLIMETERS NOMINAL MM
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
SHIELD QUANTITY1
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
INTERNAL FIT-UP DESIGNATIONSTANDARD
SEAL QUANTITY1
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
11485Interchangeable
interchangeable cross-reference
interchangeable
710126Interchangeable
interchangeable cross-reference
interchangeable
48X272Interchangeable
interchangeable cross-reference
interchangeable
708659Interchangeable
interchangeable cross-reference
interchangeable
71012/6Interchangeable
interchangeable cross-reference
interchangeable
WC87008BInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 710126?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 710126?
710126 is a CAPACITOR,FIXED,PAPER DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 710126?
There are 6 known substitutes for 710126: 11485, 710126, 48X272 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 710126?
710126 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8204. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 710126

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026